|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3235||Genuine Swiss Clone 3235 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Dial Color||Blue Concentric Dial|
Case Back: Solid. xxx usually uses a solid bottom cover, which can be used for many years. There are many boxes made of various materials. These watch cases cannot prevent damage and are easily damaged. The backs of these watches are sturdy and can be used for many years.
Bezel Material: Stainless Steel. Bezel material has been around since ancient times. It has been used as a decorative material for watches and clocks for more than two thousand years. A watch face made from stainless steel bezel materials can withstand extreme temperatures.
Clasp: Fold Over Clasp. This watch case has a designed lock which allows the user to fold it over in multiple positions or angles for unique and unique use.
Hand: Silver-tone. About the watch, the hands is silver-tone. It fits your watch dial perfectly.
Band Material: 316L. A good band can better protect your watch. 316L is one of the most heat-resistant stainless steel grades. Its corrosion resistance is very good, even at temperatures as high as 1100*F, without any further heat treatment.
Watch Case: 316L. The raw material of this case is 316L, one of the most heat-resistant stainless steel grades. Its corrosion resistance is very good, even at temperatures as high as 1100*F, without any further heat treatment.
Second Markers: Minute Markers around the outer rim. The design of the second hand in the watch is as shown in the figure above, which is also called the hand of a clock. Many famous designs have adopted this design element.
Crystal: Sapphire Crystal. Sapphire crystal is higher in impact resistance, air tightness and hardness than other materials, and the processing cost is also higher, so it is mostly used in top watch brands. Tips: The A Replica is applied with mineral glass instead of sapphire.
Water Resistance: 30 meters. A good waterproof of the watch has been applied, it is 30 meters. But make sure to close the crown properly. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Luminiscence: Hands and Markers. For the watch, the luminiscence is hands and markers. With this watch, you will not waste time to check the real-time.
1:1 Clone, A Replica, AAA Replica, AAAAA Clone, Top 1:1 Clone